Going For Broke 72dpi IMG_3394

It has taken some time but I have slowly gotten the process of making these Foundlings down to a kind of science. After figuring out the aesthetic direction which sometimes takes days and at other times, months, I fit the piece together as I “engineer it”. Fit one piece together, take it apart. Move onto the second piece. Fit both pieces together, take it apart. And so on. By time I stain and prepare all of the pieces, when I finally fit, glue and screw all of the pieces, I don’t have to worry about if the pieces will go together.

In the final process, I give the screws one final half turn to make sure everything is secure and that’s when it happened. Literally, the last piece, the last screw, that last half turn… Crack. The white glass shade cracked.

Do I leave it as is, as so much of my work has cracks in it or struggle to take the entire piece apart; hope that I can get it apart; hope I don’t ruin it beyond repair and hope that I can get it back together again? All this, only after trying to find a replacement glass part that will fit.

Knowing how tight a screw has to be is a very specific skill. I am not looking for perfection but I do want a certain level of quality. A crack that is largely aesthetic, adds to my work. A crack that makes a piece of glass rattle is just not acceptable. So I will take this piece completely apart and hope that I can get it back together. I never had to deal with this sort of stuff when I was drawing… I guess I will have to go for broke.

Advertisements